MINI SHELL

#!@@PERL@@ -w
# -*- perl -*-
#
# Plugin to monitor harddrive temperatures through SMART.
#
# client-conf.d/-options:
#
#	smartctl	-- path to smartctl executable
#	drives		-- List drives to monitor. E.g. "env.drives hda hdc".
#	type_$dev	-- device type for one drive, e.g. "env.type_sda 3ware,0"
#	args_$dev	-- additional arguments to smartctl for one drive,
#			   e.g. "env.args_hda -v 194,10xCelsius"
#                          Use this to make the plugin use the --all or -a option
#                          if your disk will not return it's temperature when
#                          only the -A option is used.
#	dev_$dev	-- monitoring device for one drive, e.g. twe0
#
# Note for users of RAID controllers: you can specify the drives attached to
# your RAID controller(s) as raiddev_num (e.g. sda_0). Then you must specify
# the type like this: type_sda_0 3ware,0.
#
# For a cciss RAID controller use e.g.:
#   env.drives cciss6
#   env.type_cciss6 cciss,6
#   env.dev_cciss6 cciss/c0d0
#
# Recent versions of the kernel driver use a separate major device number
# for monitoring purposes, like /dev/twe<n> or /dev/twa<n>. This can be
# put in the e.g. dev_sda environment variable, to allow the user to keep
# sda as the name of the disk.
#
# To avoid spinning up sleeping disks, you need the hdparm command in your PATH
#
#%# family=auto
#%# capabilities=autoconf
#
# Copyright (c) 2005, Lutz Peter Christoph
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
#   * Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#
#   * Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in
#     the documentation and/or other materials provided with the
#     distribution.
#
#   * The name and aliases of Lutz Peter Christoph ("Lupe Christoph",
#     "Lutz Christoph") may not be used to endorse or promote products
#     derived from this software without specific prior written
#     permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# $Id: hddtemp_smartctl.in 1629 2008-06-05 07:56:13Z matthias $

use strict;

my $smartctl = exists $ENV{smartctl} ? $ENV{smartctl} : undef;

# If the envvar is not set, look for smartctl
# first, try $PATH
$smartctl = `which smartctl` unless $smartctl;
chomp $smartctl;
$smartctl = undef unless -x $smartctl;

# Still not found? Check obvious places
my @dirs = qw(/usr/bin /usr/sbin /usr/local/bin /usr/local/sbin);
until ($smartctl or @dirs == 0) {
  my $dir = shift @dirs;
  my $path = $dir.'/smartctl';
  $smartctl = $path if -x $path;
}

$ENV{LANG} = 'C';
$ENV{LC_ALL} = 'C';
my @drives;

# Try to get a default set of drives
if ($^O eq 'linux') {
  # On Linux, we know how to enumerate ide drives. SCSI is not as easy
  if (-d '/proc/ide') {
    opendir(IDE, '/proc/ide');
    @drives = grep /hd[a-z]/, readdir IDE;
    closedir(IDE);
  }
  # "SCSI disks" could be both SCSI or SATA - we can't know which
  # without probing them.
} elsif ($^O eq 'freebsd') {
  opendir(DEV, '/dev');
  @drives = grep /^ad[0-9]+$/, readdir DEV;
  closedir(DEV);
} elsif ($^O eq 'solaris') {
  @drives = map { s@.*/@@ ; $_ } glob '/dev/rdsk/c*t*d*s2';
}

@drives = split ' ', $ENV{drives} if exists $ENV{drives};

# Sort list of drives
@drives = sort @drives;

if (defined $ARGV[0]) {
  if ($ARGV[0] eq 'autoconf') {
    if ($smartctl and -x $smartctl) {
      if (@drives) {
        print "yes\n";
        exit 0;
      } else {
        print "no (no drives known)\n";
        exit 1;
      }
    } else {
      print "no (smartctl not found)\n";
      exit 1;
    }
  } elsif ($ARGV[0] eq 'config') {
    print "graph_title HDD temperature\n";
    print "graph_args --base 1000 -l 0\n";
    print "graph_vlabel temp in °C\n";
    print "graph_category sensors\n";
    print "graph_info This graph shows the temperature in degrees Celsius of the hard drives in the machine.\n";
    print "$_.label $_\n" foreach @drives;
    exit 0;
  }
}

foreach (@drives) {
  my $dev;
  $dev = $_ =~ /(.*)(?:_\d+)/ ? $1 : $_;

  my $fulldev = '/dev/';
  $fulldev .= 'rdsk/' if $^O eq 'solaris';
  $fulldev .= exists $ENV{'dev_'.$_} ? $ENV{'dev_'.$_} : $dev;

  # Avoid spinning up sleeping disks
  next if `hdparm -C $fulldev 2>/dev/null` =~ /standby/;

  my $cmd = $smartctl.' -A ';
  $cmd .= $ENV{'args_'.$_}.' ' if exists $ENV{'args_'.$_};
  $cmd .= '-d '.$ENV{'type_'.$_}.' ' if exists $ENV{'type_'.$_};
  $cmd .= $fulldev;

  my $output = `$cmd`;
  if ($output =~ /Current Drive Temperature:\s*(\d+)/) {
    print "$_.value $1\n";
  } elsif ($output =~ /^(194 Temperature_Celsius.*)/m) {
    my @F = split ' ', $1;
    print "$_.value $F[9]\n";
  } elsif ($output =~ /^(231 Temperature_Celsius.*)/m) {
    my @F = split ' ', $1;
    print "$_.value $F[9]\n";
  }
}