|
Server : Apache/2.2.2 (Fedora) System : Linux App1.pathumtani.go.th 2.6.20-1.2320.fc5smp #1 SMP Tue Jun 12 19:40:16 EDT 2007 i686 User : apache ( 48) PHP Version : 5.2.9 Disable Function : NONE Directory : /etc/gconf/gconf.xml.defaults/ |
Upload File : |
<?xml version="1.0"?>
<gconf>
<dir name="schemas">
<dir name="apps">
<dir name="workspace_switcher_applet">
<dir name="prefs">
<entry name="num_rows">
<local_schema short_desc="工作区切换器中的行数">
<longdesc>决定了工作区切换器将使用多少行(水平布局)或列(垂直布局)来显示工作区。此设置仅当显示所有工作区为 true 时生效。</longdesc>
</local_schema>
</entry>
<entry name="display_all_workspaces">
<local_schema short_desc="显示所有工作区">
<longdesc>如果为 true，则工作区切换器将显示所有工作区，否则只显示当前工作区。</longdesc>
</local_schema>
</entry>
<entry name="display_workspace_names">
<local_schema short_desc="显示工作区名称">
<longdesc>如果为 true，则在工作区切换器中显示工作区的名称，否则显示工作区的内容。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="window_list_applet">
<dir name="prefs">
<entry name="maximum_size">
<local_schema short_desc="窗口列表的最大大小">
<longdesc>这是窗口列表将请求使用的最大宽度。这将用于限制窗口列表在诸如边缘面板之类的大面板中的宽度，否则窗口列表将充满整个可用的空间。</longdesc>
</local_schema>
</entry>
<entry name="minimum_size">
<local_schema short_desc="窗口列表的最小大小">
<longdesc>窗口列表请求使用的最小宽度。</longdesc>
</local_schema>
</entry>
<entry name="move_unminimized_windows">
<local_schema short_desc="解除窗口最小化时将窗口移动到当前工作区">
<longdesc>如果为 true，则在解除窗口最小化的时候将其放入当前工作区。否则切换到窗口所在的工作区。</longdesc>
</local_schema>
</entry>
<entry name="group_windows">
<local_schema short_desc="何时对窗口编组">
<longdesc>决定何时在窗口列表中将同一个应用程序的窗口编组。可供选择的值有“从不”、“自动”和“总是”。</longdesc>
</local_schema>
</entry>
<entry name="display_all_workspaces">
<local_schema short_desc="显示所有工作区中的窗口">
<longdesc>如果为 true，则窗口列表将显示所有工作区的窗口，否则只显示当前工作区中的窗口。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="tasklist_applet">
<dir name="prefs">
<entry name="maximum_size">
<local_schema short_desc="窗口列表的最大大小">
<longdesc>这是窗口列表将请求使用的最大宽度。这将用于限制窗口列表在诸如边缘面板之类的大面板中的宽度，否则窗口列表将充满整个可用的空间。</longdesc>
</local_schema>
</entry>
<entry name="minimum_size">
<local_schema short_desc="窗口列表的最小大小">
<longdesc>窗口列表请求使用的最小宽度。</longdesc>
</local_schema>
</entry>
<entry name="move_unminimized_windows">
<local_schema short_desc="解除窗口最小化时将窗口移动到当前工作区">
<longdesc>如果为 true，则在解除窗口最小化的时候将其放入当前工作区。否则切换到窗口所在的工作区。</longdesc>
</local_schema>
</entry>
<entry name="group_windows">
<local_schema short_desc="何时对窗口编组">
<longdesc>决定何时在窗口列表中将同一个应用程序的窗口编组。可供选择的值有“从不”、“自动”和“总是”。</longdesc>
</local_schema>
</entry>
<entry name="display_all_workspaces">
<local_schema short_desc="显示所有工作区中的窗口">
<longdesc>如果为 true，则窗口列表将显示所有工作区的窗口，否则只显示当前工作区中的窗口。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="panel">
<dir name="toplevels">
<entry name="animation_speed">
<local_schema short_desc="动画速度">
<longdesc>面板动画的速度。可供选择的值有：“慢”、“中”、“快”。该首选项只在启用动画为 true 时才有效。</longdesc>
</local_schema>
</entry>
<entry name="auto_hide_size">
<local_schema short_desc="面板隐藏时的可见像素">
<longdesc>指定当面板自动隐藏到角落时可见的像素数。该首选项只在自动隐藏为 true 时有效。</longdesc>
</local_schema>
</entry>
<entry name="unhide_delay">
<local_schema short_desc="面板自动取消隐藏延迟">
<longdesc>指定指针进入面板区域后，面板自动重新显示前延迟的毫秒数。该首选项只在自动隐藏为 true 时才有效。</longdesc>
</local_schema>
</entry>
<entry name="hide_delay">
<local_schema short_desc="面板自动隐藏延迟">
<longdesc>指定指针离开面板区域后，面板自动隐藏前延迟的毫秒数。该首选项只在自动隐藏为 true 时才有效。</longdesc>
</local_schema>
</entry>
<entry name="enable_arrows">
<local_schema short_desc="启用隐藏按钮上的箭头">
<longdesc>如果为 true，则在隐藏按钮上显示箭头。该首选项只在启用按钮为 true 时才有意义。</longdesc>
</local_schema>
</entry>
<entry name="enable_buttons">
<local_schema short_desc="启用隐藏按钮">
<longdesc>如果为 true，按钮将被置于按钮可能被隐藏的屏幕的每个边缘，隐藏后只显示一个按钮。</longdesc>
</local_schema>
</entry>
<entry name="enable_animations">
<local_schema short_desc="启用动画">
<longdesc>如果为 true，此面板的隐藏和显示就表现为动画而不是在瞬间完成。</longdesc>
</local_schema>
</entry>
<entry name="auto_hide">
<local_schema short_desc="将面板自动隐藏到角落">
<longdesc>如果为 true，当指针离开面板区域时，面板将自动隐藏到屏幕的角落中。把指针移动到角落将导致面板重新出现。</longdesc>
</local_schema>
</entry>
<entry name="y_centered">
<local_schema short_desc="将面板在 Y 方向居中">
<longdesc>如果为 true，则忽略 y 设置并将面板置于屏幕 y 轴的中央。如果面板改变大小它将保持位置 - 例如 面板将向两个方向扩展。如果为 false，则 y 设置决定了面板的位置。</longdesc>
</local_schema>
</entry>
<entry name="x_centered">
<local_schema short_desc="将面板在 X 方向居中">
<longdesc>如果为 true，则忽略 x 设置并将面板置于屏幕 x 轴的中央。如果面板改变大小它将保持位置 - 例如面板将向两个方向扩展。如果为 false，则 x 设置决定了面板的位置。</longdesc>
</local_schema>
</entry>
<entry name="y">
<local_schema short_desc="面板的 Y 坐标">
<longdesc>面板在 Y 轴上的位置。该值只在非扩展模式下有意义。在扩展模式下忽略该值并将面板置于面板方向指定的屏幕边缘。</longdesc>
</local_schema>
</entry>
<entry name="x">
<local_schema short_desc="面板的 X 坐标">
<longdesc>面板在 X 轴上的位置。该值只在非扩展模式下有意义。在扩展模式下忽略该值并将面板置于由面板方向指定的屏幕边缘。</longdesc>
</local_schema>
</entry>
<entry name="size">
<local_schema short_desc="面板大小">
<longdesc>面板高度 (垂直面板的宽度)。面板将在运行时根据字体大小和其它指示器确定最小尺寸。最大尺寸固定为屏幕高度 (或宽度) 的四分之一。</longdesc>
</local_schema>
</entry>
<entry name="orientation">
<local_schema short_desc="面板方向">
<longdesc>面板的方向。可供选择的值有：“顶”、“底”、“左”、“右”。在扩展模式下该值指定了面板所在的屏幕边缘。在非扩展模式下“顶”和“底”的区别就不重要了 - 都表示这是水平面板 - 但仍然给出有用的提示以便某些面板对象确定其行为。例如，在“顶”面板中菜单按钮将在面板下方弹出它的菜单，而“底”面板的菜单将在面板上方弹出菜单。</longdesc>
</local_schema>
</entry>
<entry name="expand">
<local_schema short_desc="扩展以占据整个屏幕的宽度">
<longdesc>如果为 true，则面板将占据整个屏幕的宽度 (如果是垂直面板则是高度)。此时面板只能置于屏幕边缘。如果为 false，则面板只具有能够容纳面板中所有小程序、启动器、按钮的最小空间。</longdesc>
</local_schema>
</entry>
<entry name="monitor">
<local_schema short_desc="显示面板的 Xinerama 监视器">
<longdesc>在 Xinerama 设置中，您可能在每个独立的监视器上都有面板。此处指明面板显示的当前监视器。</longdesc>
</local_schema>
</entry>
<entry name="screen">
<local_schema short_desc="显示面板的 X 屏幕">
<longdesc>在多屏幕设置中，您可能在每个独立的屏幕上都有面板。此处指明了面板显示的当前屏幕。</longdesc>
</local_schema>
</entry>
<entry name="name">
<local_schema short_desc="用于标识该面板的名称">
<longdesc>这是您可以用于识别面板的友好名字。它的主要目的是在面板间切换是作为面板的窗口标题。</longdesc>
</local_schema>
</entry>
<dir name="background">
<entry name="rotate">
<local_schema short_desc="在垂直面板上旋转图像">
<longdesc>如果为 true，则在面板为垂直面板时旋转背景图像。</longdesc>
</local_schema>
</entry>
<entry name="stretch">
<local_schema short_desc="将图像拉伸到面板">
<longdesc>如果为 true，则图像将被缩放到面板尺寸。不保持图像原来的宽高比。</longdesc>
</local_schema>
</entry>
<entry name="fit">
<local_schema short_desc="缩放图像以匹配面板">
<longdesc>如果为 true，则图像将被缩放 (保持图像原本的宽高比) 到面板高度 (水平面板)。</longdesc>
</local_schema>
</entry>
<entry name="image">
<local_schema short_desc="背景图像">
<longdesc>指定用作背景图像的文件。如果图像含有 alpha 通道它就会组合到桌面背景图像中。</longdesc>
</local_schema>
</entry>
<entry name="opacity">
<local_schema short_desc="背景颜色不透明">
<longdesc>指定背景颜色格式的不透明度。如果颜色不是完全不透明的(值小于 65535)则色彩将与桌面背景图像组合。</longdesc>
</local_schema>
</entry>
<entry name="color">
<local_schema short_desc="背景颜色">
<longdesc>以 #RGB 格式指定面板的背景颜色。</longdesc>
</local_schema>
</entry>
<entry name="type">
<local_schema short_desc="背景类型">
<longdesc>此面板的背景类型。可供选择的值有：“gtk”使用默认的 GTK+ 构件背景，“颜色”将颜色首选项作为背景颜色，“图像”将图像首选项指定的图像作为背景。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="objects">
<entry name="action_type">
<local_schema short_desc="动作按钮类型">
<longdesc>该按钮代表的动作类型。可供选择的值有“锁定”、“注销”、“运行”、“搜索”和“抓图”。该设置只在对象类型为“动作小程序”的时候才有效。</longdesc>
</local_schema>
</entry>
<entry name="launcher_location">
<local_schema short_desc="启动器位置">
<longdesc>描述启动器的 .desktop 文件的位置。该设置只在对象类型为“启动器对象”时才有效。</longdesc>
</local_schema>
</entry>
<entry name="menu_path">
<local_schema short_desc="菜单环境路径">
<longdesc>从此创建菜单内容的路径。该设置只在 use_menu_path 为 true 并且对象类型为“菜单对象”时才有效。</longdesc>
</local_schema>
</entry>
<entry name="use_menu_path">
<local_schema short_desc="使用菜单内容的自定义路径">
<longdesc>如果为 true，菜单路径设置就被用作需创建菜单内容的路径。如果为 false，则忽略菜单路径设置。该设置只在对象类型为“菜单对象”时才有效。</longdesc>
</local_schema>
</entry>
<entry name="custom_icon">
<local_schema short_desc="用于对象按钮的图标">
<longdesc>用作对象按钮图标的图像文件的位置。该设置只在对象类型为“抽屉对象”或“菜单对象”并且 use_custom_icon 为 true 时才有效。</longdesc>
</local_schema>
</entry>
<entry name="use_custom_icon">
<local_schema short_desc="使用对象按钮的自定义图标">
<longdesc>如果为 true，则定制图标设置就被用作按钮的定制图标。如果为 false，则忽略定制图标设置。该设置只在对象类型为“菜单对象”或“抽屉对象”时才有效。</longdesc>
</local_schema>
</entry>
<entry name="tooltip">
<local_schema short_desc="抽屉或菜单的工具提示">
<longdesc>在此抽屉或菜单的工具提示中显示的文本。该设置只有在对象类型为“抽屉对象”或“菜单对象”时才有效。</longdesc>
</local_schema>
</entry>
<entry name="attached_toplevel_id">
<local_schema short_desc="附着于抽屉的面板">
<longdesc>附着于该抽屉的面板的标识。该设置只在对象类型为“抽屉对象”的时候才有效。</longdesc>
</local_schema>
</entry>
<entry name="bonobo_iid">
<local_schema short_desc="小程序 Bonobo IID">
<longdesc>小程序的 Bonobo 实现 ID - 例如 “OAFIID:GNOME_ClockApplet”。该设置只在对象类型为“bonobo 小程序”的时候才有效。</longdesc>
</local_schema>
</entry>
<entry name="locked">
<local_schema short_desc="将对象锁定在面板中">
<longdesc>如果为 true，则用户在使用“取消锁定”菜单项取消对象的锁定之前，无法移动小程序。</longdesc>
</local_schema>
</entry>
<entry name="panel_right_stick">
<local_schema short_desc="把位置解释为相对于底/右边">
<longdesc>如果为 true，则对象的位置被解释为相对于面板的右边(垂直面板则为底边)。</longdesc>
</local_schema>
</entry>
<entry name="position">
<local_schema short_desc="对象在面板中的位置">
<longdesc>该面板对象的位置。位置是相对于面板左边(垂直面板是顶边)的像素数。</longdesc>
</local_schema>
</entry>
<entry name="toplevel_id">
<local_schema short_desc="含有对象的顶层面板">
<longdesc>含有该对象的顶层面板的标识。</longdesc>
</local_schema>
</entry>
<entry name="object_type">
<local_schema short_desc="面板对象类型">
<longdesc>该面板对象的类型。可供选择的值有“抽屉对象”、“菜单对象”、“启动器对象”、“bonobo 小程序”、“动作小程序”和“菜单栏”。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="global">
<entry name="disable_force_quit">
<local_schema short_desc="禁止强制退出">
<longdesc>如果为 true，面板将会删除对强制退出按钮的访问，以禁止用户强制关闭应用程序。</longdesc>
</local_schema>
</entry>
<entry name="disable_log_out">
<local_schema short_desc="禁止注销">
<longdesc>如果为 true，面板将会删除对注销屏幕菜单项的访问，以禁止用户注销。</longdesc>
</local_schema>
</entry>
<entry name="disable_lock_screen">
<local_schema short_desc="禁止锁住屏幕">
<longdesc>如果为 true，面板将会删除对锁定屏幕菜单项的访问，以禁止用户锁住其屏幕。</longdesc>
</local_schema>
</entry>
<entry name="disabled_applets">
<local_schema short_desc="禁止装入的小程序的 IID">
<longdesc>列出了面板将忽略的小程序 IID。这样，您就可以禁止装入特定的小程序，或者不将这些小程序显示在菜单中。例如，要禁用 mini-commander 小程序，只需在此列表中添加“OAFIID:GNOME_MiniCommanderApplet”。要让此设置生效，必须重新启动面板。</longdesc>
</local_schema>
</entry>
<entry name="locked_down">
<local_schema short_desc="整个面板锁定">
<longdesc>如果为 true，面板将不允对面板的配置进行任何更改。但是，可能需要对单个小程序进行分别锁定。要让此设置生效，必须重新启动面板。</longdesc>
</local_schema>
</entry>
<entry name="highlight_launchers_on_mouseover">
<local_schema short_desc="鼠标悬停时突出显示启动器">
<longdesc>如果为 true，当用户将鼠标指针指向启动器时会突出显示该启动器。</longdesc>
</local_schema>
</entry>
<entry name="confirm_panel_remove">
<local_schema short_desc="确认面板删除">
<longdesc>如果为 true，当用户想要删除面板时将请求确认。</longdesc>
</local_schema>
</entry>
<entry name="drawer_autoclose">
<local_schema short_desc="自动关闭抽屉">
<longdesc>如果为 true，当用户单击抽屉中的启动器时会自动关闭抽屉。</longdesc>
</local_schema>
</entry>
<entry name="window_screenshot_key">
<local_schema short_desc="不再使用">
</local_schema>
</entry>
<entry name="screenshot_key">
<local_schema short_desc="不再使用">
</local_schema>
</entry>
<entry name="run_key">
<local_schema short_desc="不再使用">
</local_schema>
</entry>
<entry name="menu_key">
<local_schema short_desc="不再使用">
</local_schema>
</entry>
<entry name="enable_key_bindings">
<local_schema short_desc="不再使用">
</local_schema>
</entry>
<entry name="panel_hide_delay">
<local_schema short_desc="不再使用">
</local_schema>
</entry>
<entry name="panel_animation_speed">
<local_schema short_desc="不再使用">
</local_schema>
</entry>
<entry name="panel_show_delay">
<local_schema short_desc="不再使用">
</local_schema>
</entry>
<entry name="panel_minimized_size">
<local_schema short_desc="不再使用">
</local_schema>
</entry>
<entry name="enable_animations">
<local_schema short_desc="启用动画">
</local_schema>
</entry>
<entry name="keep_menus_in_memory">
<local_schema short_desc="不再使用">
</local_schema>
</entry>
<entry name="tooltips_enabled">
<local_schema short_desc="启用工具提示">
<longdesc>如果为 true，会显示面板中对象的工具提示。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="general">
<entry name="profiles_migrated">
<local_schema short_desc="旧的配置文件已迁移">
<longdesc>一个布尔型标志，表明用户在 /apps/panel/profiles/default 中先前的配置是否已经复制到 /apps/panel。</longdesc>
</local_schema>
</entry>
<entry name="object_id_list">
<local_schema short_desc="面板对象 ID 列表">
<longdesc>面板对象 ID 列表。每个 ID 都标明了一个独立的面板对象 (例如启动器、动作按钮或菜单按钮/菜单栏)。关于这些小程序的设置保存在 /apps/panel/objects/$(id) 之中。</longdesc>
</local_schema>
</entry>
<entry name="applet_id_list">
<local_schema short_desc="面板小程序 ID 列表">
<longdesc>面板小程序 ID 列表。每个 ID 都标明了一个独立的面板小程序。关于这些小程序的设置保存在 /apps/panel/applets/$(id) 之中。</longdesc>
</local_schema>
</entry>
<entry name="toplevel_id_list">
<local_schema short_desc="面板 ID 列表">
<longdesc>面板 ID 的列表。每个 ID 都标明了一个独立的顶层面板。关于这些面板的设置保存在 /apps/panel/toplevels/$(id) 之中。</longdesc>
</local_schema>
</entry>
<entry name="enable_autocompletion">
<local_schema short_desc="启用“运行应用程序”对话框中的自动补全">
<longdesc>如果为 true，则启用“运行应用程序”对话框中的自动补全功能。</longdesc>
</local_schema>
</entry>
<entry name="show_program_list">
<local_schema short_desc="扩展“运行应用程序”对话框中的程序列表">
<longdesc>如果为 true，则在打开“运行应用程序”对话框时其中的“已知的应用程序”列表处于展开状态。这一设置只在 enable_program_list 为 true 时才生效。</longdesc>
</local_schema>
</entry>
<entry name="enable_program_list">
<local_schema short_desc="启用“运行应用程序”对话框中的程序列表">
<longdesc>如果为 true，则“运行应用程序”对话框中的“已知的应用程序”列表就处于可用状态。当对话框打开时列表是否展开是由设置 show_program_list 来控制的。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="pager_applet">
<dir name="prefs">
<entry name="num_rows">
<local_schema short_desc="工作区切换器中的行数">
<longdesc>决定了工作区切换器将使用多少行(水平布局)或列(垂直布局)来显示工作区。此设置仅当显示所有工作区为 true 时生效。</longdesc>
</local_schema>
</entry>
<entry name="display_all_workspaces">
<local_schema short_desc="显示所有工作区">
<longdesc>如果为 true，则工作区切换器将显示所有工作区，否则只显示当前工作区。</longdesc>
</local_schema>
</entry>
<entry name="display_workspace_names">
<local_schema short_desc="显示工作区名称">
<longdesc>如果为 true，则在工作区切换器中显示工作区的名称，否则显示工作区的内容。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="fish_applet">
<dir name="prefs">
<entry name="rotate">
<local_schema short_desc="在垂直面板上作相应旋转">
<longdesc>如果为 true，则会在面板为垂直面板时旋转小鱼的动画。</longdesc>
</local_schema>
</entry>
<entry name="speed">
<local_schema short_desc="每帧暂停">
<longdesc>此处指定了每帧动画显示的秒数。</longdesc>
</local_schema>
</entry>
<entry name="frames">
<local_schema short_desc="小鱼动画的帧数">
<longdesc>此处指定了小鱼动画显示的帧数。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="点击时执行的命令">
<longdesc>此处指定了点击小鱼后尝试执行的命令。</longdesc>
</local_schema>
</entry>
<entry name="image">
<local_schema short_desc="小鱼的动画位图">
<longdesc>此处指定的位图文件名，会被用来显示与该位图目录相关的小鱼的动画。</longdesc>
</local_schema>
</entry>
<entry name="name">
<local_schema short_desc="小鱼的名字">
<longdesc>没有名字的鱼是非常傻的鱼。为赋予它生命，请给它命名。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="clock_applet">
<dir name="prefs">
<entry name="internet_time">
<local_schema short_desc="使用 Internet 时间">
<longdesc>在 GNOME 2.6 中不推荐使用此键，而应该使用“format”键。此大纲仅为与旧版本兼容而保留。</longdesc>
</local_schema>
</entry>
<entry name="unix_time">
<local_schema short_desc="使用 UNIX 时间">
<longdesc>在 GNOME 2.6 中不推荐使用此键，而应该使用“format”键。此大纲仅为与旧版本兼容而保留。</longdesc>
</local_schema>
</entry>
<entry name="hour_format">
<local_schema short_desc="小时格式">
<longdesc>在 GNOME 2.6 中不推荐使用此键，而应该使用“format”键。此大纲仅为与旧版本兼容而保留。</longdesc>
</local_schema>
</entry>
<entry name="show_week_numbers">
<local_schema short_desc="在日历中显示周序号">
<longdesc>如果为 true，则在日历中显示周序号。</longdesc>
</local_schema>
</entry>
<entry name="config_tool">
<local_schema short_desc="时间配置工具">
<longdesc>此处指定了配置时间所要运行的程序。</longdesc>
</local_schema>
</entry>
<entry name="gmt_time">
<local_schema short_desc="使用 UTC">
<longdesc>如果为 true，则显示 UTC 时区的时间。</longdesc>
</local_schema>
</entry>
<entry name="show_tooltip">
<local_schema short_desc="在提示中显示日期">
<longdesc>如果为 true，则当鼠标在时钟上停留时在工具提示中显示日期。</longdesc>
</local_schema>
</entry>
<entry name="show_date">
<local_schema short_desc="在时钟上显示日期">
<longdesc>如果为 true，则在时钟上除了显示时间外，还要显示日期。</longdesc>
</local_schema>
</entry>
<entry name="show_seconds">
<local_schema short_desc="显示带秒的时间">
<longdesc>如果为 true，则显示时间时显示秒数。</longdesc>
</local_schema>
</entry>
<entry name="custom_format">
<local_schema short_desc="时钟的自定义格式">
<longdesc>当 format 键设为“custom”时，此键指定了时钟小程序要使用的格式。您可以选择 strftime() 明白的格式符来获取特定格式。</longdesc>
</local_schema>
</entry>
<entry name="format">
<local_schema short_desc="小时格式">
</local_schema>
</entry>
</dir>
</dir>
</dir>
<dir name="system">
<dir name="smb">
<entry name="workgroup">
<local_schema short_desc="SMB 工作组">
<longdesc>用户所属的 Windows 网络工作组或域。为了让新工作组完全生效，用户可能需要注销并再次登录。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="dns_sd">
<entry name="extra_domains">
<local_schema short_desc="DNS-SD 服务应查阅的额外域">
<longdesc>以逗号分隔的 DNS-SD 域列表，这些域将出现在“network:///”位置中。</longdesc>
</local_schema>
</entry>
<entry name="display_local">
<local_schema short_desc="如何显示本地 DNS-SD 服务">
<longdesc>可供选择的值有“merged”、“separate”和“disabled”。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="proxy">
<entry name="autoconfig_url">
<local_schema short_desc="自动代理配置 URL">
<longdesc>提供代理配置值的 URL。</longdesc>
</local_schema>
</entry>
<entry name="socks_port">
<local_schema short_desc="SOCKS 代理端口">
<longdesc>您使用的代理服务器的端口号定义在“/system/proxy/socks_host”中。</longdesc>
</local_schema>
</entry>
<entry name="socks_host">
<local_schema short_desc="SOCKS 代理主机名">
<longdesc>代理套接字的机器名。</longdesc>
</local_schema>
</entry>
<entry name="ftp_port">
<local_schema short_desc="FTP 代理端口">
<longdesc>您使用的代理服务器的端口号定义在“/system/proxy/ftp_host”中。</longdesc>
</local_schema>
</entry>
<entry name="ftp_host">
<local_schema short_desc="FTP 代理主机名">
<longdesc>代理 FTP 的机器名。</longdesc>
</local_schema>
</entry>
<entry name="secure_port">
<local_schema short_desc="安全 HTTP 代理端口">
<longdesc>您使用的代理服务器的端口号定义在“/system/proxy/secure_host”中。</longdesc>
</local_schema>
</entry>
<entry name="secure_host">
<local_schema short_desc="安全 HTTP 代理主机名">
<longdesc>代理安全 HTTP 的机器名。</longdesc>
</local_schema>
</entry>
<entry name="mode">
<local_schema short_desc="代理配置模式">
<longdesc>选择代理配置模式。支持的值为“无”、“手动”、“自动”。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="http_proxy">
<entry name="ignore_hosts">
<local_schema short_desc="非代理服务器">
<longdesc>此键中定义的主机列表将不通过代理(如果有设定)而直接联接。其值可以是主机名、域名(支持通配符开头的形式如 *.foo.com)、IP 主机地址(既可 IPv4 亦可 IPv6)以及跟随网络掩码的网络地址(例如 192.168.0.0/24)。</longdesc>
</local_schema>
</entry>
<entry name="authentication_password">
<local_schema short_desc="HTTP 代理密码">
<longdesc>用于 HTTP 代理认证的密码。</longdesc>
</local_schema>
</entry>
<entry name="authentication_user">
<local_schema short_desc="HTTP 代理用户名">
<longdesc>用于 HTTP 代理认证的用户名。</longdesc>
</local_schema>
</entry>
<entry name="use_authentication">
<local_schema short_desc="认证代理服务器连接">
<longdesc>若为真，则对代理服务器的连接需要身份验证。用户名/密码组合由“/system/http_proxy/authentication_user”和“/system/http_proxy/authentication_password”定义。</longdesc>
</local_schema>
</entry>
<entry name="port">
<local_schema short_desc="HTTP 代理端口">
<longdesc>您使用的代理服务器的端口号定义在“/system/http_proxy/host”中。</longdesc>
</local_schema>
</entry>
<entry name="host">
<local_schema short_desc="HTTP 代理主机名">
<longdesc>代理 HTTP 的机器名。</longdesc>
</local_schema>
</entry>
<entry name="use_http_proxy">
<local_schema short_desc="使用 HTTP 代理">
<longdesc>访问 Internet 上的 HTTP 时启用代理服务器设置。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="desktop">
<dir name="gnome">
<dir name="url-handlers">
<dir name="h323">
<entry name="needs_terminal">
<local_schema short_desc="在终端运行命令">
<longdesc>True 代表要处理此 URL 的程序应该在终端中运行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="处理“H323”URLs 的程序">
<longdesc>若启用的话，用于处理“H323”URLs 的命令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的命令是否应处理“h323”URLs">
<longdesc>设为 true 可在“command”键中指定一个程序来处理“h323”URLs。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="callto">
<entry name="needs_terminal">
<local_schema short_desc="在终端运行命令">
<longdesc>True 代表要处理此 URL 的程序应该在终端中运行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="处理“callto”URLs 的程序">
<longdesc>若启用的话，用于处理“callto”URLs 的命令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的命令是否应处理“callto”URLs">
<longdesc>设为 true 可在“command”键中指定一个程序来处理“callto”URLs。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="aim">
<entry name="needs_terminal">
<local_schema short_desc="在终端运行命令">
<longdesc>True 代表要处理此 URL 的程序应该在终端中运行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="处理“aim”URLs 的程序">
<longdesc>若启用的话，用于处理“aim”URLs 的命令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的命令是否应处理“aim”URLs">
<longdesc>设为 true 可在“command”键中指定一个程序来处理“aim”URLs。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="mailto">
<entry name="needs_terminal">
<local_schema short_desc="在终端运行命令">
<longdesc>True 代表要处理此 URL 的程序应该在终端中运行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="处理“mailto”URLs 的程序">
<longdesc>若启用的话，用于处理“mailto”URLs 的命令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的命令是否应处理“mailto”URLs">
<longdesc>设为 true 可在“command”键中指定一个程序来处理“mailto”URLs。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="https">
<entry name="needs_terminal">
<local_schema short_desc="在终端运行命令">
<longdesc>True 代表要处理此 URL 的程序应该在终端中运行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="处理“https”URLs 的程序">
<longdesc>若启用的话，用于处理“https”URLs 的命令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的命令是否应处理“https”URLs">
<longdesc>设为 true 可在“command”键中指定一个程序来处理“https”URLs。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="http">
<entry name="needs_terminal">
<local_schema short_desc="在终端运行命令">
<longdesc>True 代表要处理此 URL 的程序应该在终端中运行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="处理“http”URLs 的程序">
<longdesc>若启用的话，用于处理“http”URLs 的命令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的命令是否应处理“http”URLs">
<longdesc>设为 true 可在“command”键中指定一个程序来处理“http”URLs。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="man">
<entry name="needs_terminal">
<local_schema short_desc="在终端运行命令">
<longdesc>True 代表要处理此 URL 的程序应该在终端中运行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="处理“man”URLs 的程序">
<longdesc>若启用的话，用于处理“man”URLs 的命令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的命令是否应处理“man”URLs">
<longdesc>设为 true 可在“command”键中指定一个程序来处理“man”URLs。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="info">
<entry name="needs_terminal">
<local_schema short_desc="在终端运行命令">
<longdesc>True 代表要处理此 URL 的程序应该在终端中运行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="处理“info”URLs 的程序">
<longdesc>若启用的话，用于处理“info”URLs 的命令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的命令是否应处理“info”URLs">
<longdesc>设为 true 可在“command”键中指定一个程序来处理“info”URLs。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="ghelp">
<entry name="needs_terminal">
<local_schema short_desc="在终端运行命令">
<longdesc>True 代表要处理此 URL 的程序应该在终端中运行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="处理“ghelp”URLs 的程序">
<longdesc>若启用的话，用于处理“ghelp”URLs 的命令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的命令是否应处理“ghelp”URLs">
<longdesc>设为 true 可在“command”键中指定一个程序来处理“ghelp”URLs。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="trash">
<entry name="needs_terminal">
<local_schema short_desc="在终端运行命令">
<longdesc>True 代表要处理此 URL 的程序应该在终端中运行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="处理“trash”URLs 的程序">
<longdesc>若启用的话，用于处理“trash”URLs 的命令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的命令是否应处理“trash”URLs">
<longdesc>设为 true 可在“command”键中指定一个程序来处理“trash”URLs。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="typing_break">
<entry name="enabled">
<local_schema short_desc="是否允许键盘锁定">
<longdesc>是否允许键盘锁定。</longdesc>
</local_schema>
</entry>
<entry name="allow_postpone">
<local_schema short_desc="允许推迟间断">
<longdesc>是否可推迟打字间断屏幕。</longdesc>
</local_schema>
</entry>
<entry name="break_time">
<local_schema short_desc="间断时间">
<longdesc>打字间断应该持续的分钟数。</longdesc>
</local_schema>
</entry>
<entry name="type_time">
<local_schema short_desc="打字时间">
<longdesc>间断模式开始前的最少打字时间。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="thumbnailers">
<entry name="disable_all">
<local_schema short_desc="禁用所有外部缩略图程序">
<longdesc>设为 true 可禁用所有外部缩略图程序，而不管这些程序自身是启用还是禁用。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="sound">
<entry name="event_sounds">
<local_schema short_desc="事件的声音">
<longdesc>是否在用户事件发生时播放声音。</longdesc>
</local_schema>
</entry>
<entry name="enable_esd">
<local_schema short_desc="启用 ESD">
<longdesc>在启动时启用声音服务器。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="peripherals">
<dir name="mouse">
<entry name="cursor_size">
<local_schema short_desc="光标大小">
<longdesc>cursor_theme 引用的光标大小。</longdesc>
</local_schema>
</entry>
<entry name="cursor_theme">
<local_schema short_desc="光标主题">
<longdesc>光标主题名称。仅适用于支持 Xcursor 的 Xserver，比如 XFree86 4.3 或更新版本。</longdesc>
</local_schema>
</entry>
<entry name="cursor_font">
<local_schema short_desc="光标字体">
<longdesc>光标字体的名称。如果未设置，则使用默认的字体。此设置只有在每次会话开始前传送给 X 服务器，因此在会话当中改变它不会有用，要等到您下次登录后才会起作用。</longdesc>
</local_schema>
</entry>
<entry name="locate_pointer">
<local_schema short_desc="定位指针">
<longdesc>当控制键按下和放开时突出显示指针的当前位置</longdesc>
</local_schema>
</entry>
<entry name="double_click">
<local_schema short_desc="双击时间">
<longdesc>鼠标双击的时间长度</longdesc>
</local_schema>
</entry>
<entry name="drag_threshold">
<local_schema short_desc="拖放阈值">
<longdesc>判断拖放开始的距离</longdesc>
</local_schema>
</entry>
<entry name="motion_threshold">
<local_schema short_desc="运动阈值">
<longdesc>启动鼠标运动加速前鼠标必须移动的像素点数。系统默认的值是 -1。</longdesc>
</local_schema>
</entry>
<entry name="motion_acceleration">
<local_schema short_desc="单击">
<longdesc>鼠标运动的加速倍数。系统的默认值是 -1。</longdesc>
</local_schema>
</entry>
<entry name="single_click">
<local_schema short_desc="单击">
<longdesc>单击可打开图标</longdesc>
</local_schema>
</entry>
<entry name="left_handed">
<local_schema short_desc="鼠标按钮方向">
<longdesc>为左手鼠标交换左右鼠标按钮</longdesc>
</local_schema>
</entry>
</dir>
<dir name="keyboard">
<entry name="remember_numlock_state">
<local_schema short_desc="记住 NumLock 状态">
<longdesc>设定为 true 时，GNOME 将在不同会话间记住 NumLock 灯的状态。</longdesc>
</local_schema>
</entry>
<entry name="bell_custom_file">
<local_schema short_desc="自定义键盘铃声文件名">
<longdesc>要播放的响铃声音的文件名</longdesc>
</local_schema>
</entry>
<entry name="bell_mode">
<local_schema>
<longdesc>可用的值是“on”，“off”和“custom”。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="lockdown">
<entry name="disable_print_setup">
<local_schema short_desc="禁用打印设置">
<longdesc>避免用户修改打印设置。例如，这将禁止访问全部应用程序的“打印设置”对话框。</longdesc>
</local_schema>
</entry>
<entry name="disable_printing">
<local_schema short_desc="禁用打印">
<longdesc>避免用户进行打印。例如，这将禁止访问全部应用程序的“打印”对话框。</longdesc>
</local_schema>
</entry>
<entry name="disable_save_to_disk">
<local_schema short_desc="禁止将文件保存到磁盘">
<longdesc>避免用户将文件保存到磁盘。例如，这将禁止访问全部应用程序的“另存为”对话框。</longdesc>
</local_schema>
</entry>
<entry name="disable_command_line">
<local_schema short_desc="禁用命令行">
<longdesc>避免用户表单访问终端或指定要执行的命令行。例如，这将禁止访问面板的“运行应用程序”对话框。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="interface">
<entry name="show_unicode_menu">
<local_schema short_desc="显示“Unicode 控制字符”菜单">
<longdesc>输入框和文本视图中的快捷菜单是否应提供插入控制字符的选项</longdesc>
</local_schema>
</entry>
<entry name="show_input_method_menu">
<local_schema short_desc="显示“输入法”菜单">
<longdesc>输入框和文本视图中的快捷菜单是否应提供更改输入法的选项</longdesc>
</local_schema>
</entry>
<entry name="menubar_accel">
<local_schema short_desc="菜单栏加速键">
<longdesc>打开菜单栏的键盘快捷键。</longdesc>
</local_schema>
</entry>
<entry name="file_chooser_backend">
<local_schema short_desc="GtkFileChooser 的模块">
<longdesc>GtkFileChooser 部件所用的文件系统模型的模块。可供选择的值是“gnome-vfs”和“gtk+”。</longdesc>
</local_schema>
</entry>
<entry name="status_bar_meter_on_right">
<local_schema short_desc="状态栏位于右边">
<longdesc>是否在右边显示状态栏指示</longdesc>
</local_schema>
</entry>
<entry name="use_custom_font">
<local_schema short_desc="使用自定义字体">
<longdesc>是否在 gtk+ 程序中使用自定义字体。</longdesc>
</local_schema>
</entry>
<entry name="monospace_font_name">
<local_schema short_desc="等距字体">
<longdesc>类似终端程序等位置中所用的等距(固定宽度)字体。</longdesc>
</local_schema>
</entry>
<entry name="document_font_name">
<local_schema short_desc="文档字体">
<longdesc>读取文档所使用的默认字体的名称</longdesc>
</local_schema>
</entry>
<entry name="gtk-im-status-style">
<local_schema short_desc="GTK IM 状态风格">
<longdesc>gtk+ 使用的 GTK+ 输入法状态风格的名称。</longdesc>
</local_schema>
</entry>
<entry name="gtk-im-preedit-style">
<local_schema short_desc="GTK IM 预编辑风格">
<longdesc>gtk+ 使用的 GTK+ 输入法预编辑风格的名称。</longdesc>
</local_schema>
</entry>
<entry name="font_name">
<local_schema short_desc="默认字体">
<longdesc>gtk+ 使用的默认字体的名称。</longdesc>
</local_schema>
</entry>
<entry name="gtk_key_theme">
<local_schema short_desc="Gtk+ 主题">
<longdesc>gtk+ 使用的默认主题的基本名称。</longdesc>
</local_schema>
</entry>
<entry name="gtk_theme">
<local_schema short_desc="Gtk+ 主题">
<longdesc>gtk+ 使用的默认主题的基本名称。</longdesc>
</local_schema>
</entry>
<entry name="icon_theme">
<local_schema short_desc="图标主题">
<longdesc>用于面板、Nautilus 等的图标主题。</longdesc>
</local_schema>
</entry>
<entry name="cursor_blink_time">
<local_schema short_desc="光标闪烁时间">
<longdesc>光标闪烁周期的长度，单位为毫秒</longdesc>
</local_schema>
</entry>
<entry name="cursor_blink">
<local_schema short_desc="光标闪烁">
<longdesc>光标是否应该闪烁</longdesc>
</local_schema>
</entry>
<entry name="toolbar_icon_size">
<local_schema short_desc="工具栏图标大小">
<longdesc>用来指定工具栏上显示的图标的大小</longdesc>
</local_schema>
</entry>
<entry name="toolbar_detachable">
<local_schema short_desc="工具栏可分离">
<longdesc>用户是否能分离工具栏并四处移动它们</longdesc>
</local_schema>
</entry>
<entry name="menubar_detachable">
<local_schema short_desc="菜单栏可分离">
<longdesc>用户是否能分离菜单栏并四处移动它们</longdesc>
</local_schema>
</entry>
<entry name="menus_have_icons">
<local_schema short_desc="菜单上使用图标">
<longdesc>是否在菜单上菜单项的旁边显示图标</longdesc>
</local_schema>
</entry>
<entry name="toolbar_style">
<local_schema short_desc="工具栏风格">
<longdesc>工具栏风格。有效的值是“both”，“both_horiz”，“icon”和“text”</longdesc>
</local_schema>
</entry>
<entry name="can_change_accels">
<local_schema short_desc="能改变加速键">
<longdesc>当菜单弹出后，用户是否能动态地输入新的加速键</longdesc>
</local_schema>
</entry>
<entry name="menus_have_tearoff">
<local_schema short_desc="菜单具有分离条">
<longdesc>菜单是否应该有分离条</longdesc>
</local_schema>
</entry>
<entry name="enable_animations">
<local_schema short_desc="启用动画">
<longdesc>是否应该显示动画。注意：这是一个全局的设置，它将改变窗口管理器、面板等的行为。</longdesc>
</local_schema>
</entry>
<entry name="accessibility">
<local_schema short_desc="启用辅助工具">
<longdesc>应用程序是否应该有辅助访问支持</longdesc>
</local_schema>
</entry>
</dir>
<dir name="file-views">
<entry name="icon_theme">
<local_schema short_desc="文件图标主题">
<longdesc>用于显示文件图标的主题</longdesc>
</local_schema>
</entry>
</dir>
<dir name="background">
<entry name="color_shading_type">
<local_schema short_desc="颜色渐变类型">
<longdesc>如何渐变背景颜色。可用的值有“horizontal-gradient”，“vertical-gradient”和“solid”</longdesc>
</local_schema>
</entry>
<entry name="secondary_color">
<local_schema short_desc="次要颜色">
<longdesc>绘制渐变带时的右边或下边颜色，绘制纯色时不使用。</longdesc>
</local_schema>
</entry>
<entry name="primary_color">
<local_schema short_desc="主要颜色">
<longdesc>绘制渐变带时左边或上边的颜色，或者是绘制的纯色。</longdesc>
</local_schema>
</entry>
<entry name="picture_opacity">
<local_schema short_desc="图片不透明度">
<longdesc>绘制背景图片的不透明度</longdesc>
</local_schema>
</entry>
<entry name="picture_filename">
<local_schema short_desc="图片文件名">
<longdesc>用作背景图片的文件</longdesc>
</local_schema>
</entry>
<entry name="picture_options">
<local_schema short_desc="图片选项">
<longdesc>决定如何显示墙纸文件名指定的图片。可用的值有：“none”, “wallpaper”, “centered”, “scaled”, “stretched”。</longdesc>
</local_schema>
</entry>
<entry name="draw_background">
<local_schema short_desc="绘制桌面背景">
<longdesc>让 GNOME 绘制桌面背景</longdesc>
</local_schema>
</entry>
</dir>
<dir name="applications">
<dir name="component_viewer">
<entry name="exec">
<local_schema short_desc="默认组件查看器应用程序">
<longdesc>该应用程序用于查看需要组件才能查看的文件。参数 %s 将被替换为文件的 URI，参数 %c 将被替换为组件 IID。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="window_manager">
<entry name="workspace_names">
<local_schema short_desc="工作区名称(不推荐)">
<longdesc>第一个窗口管理器工作区名称的列表。此键自 GNOME 2.12 之后不再推荐使用。</longdesc>
</local_schema>
</entry>
<entry name="number_of_workspaces">
<local_schema short_desc="工作区数目(不推荐)">
<longdesc>窗口管理器应该使用的工作区数目。此键自 GNOME 2.12 之后不再推荐使用。</longdesc>
</local_schema>
</entry>
<entry name="current">
<local_schema short_desc="用户窗口管理器(不推荐)">
<longdesc>首先尝试的窗口管理器。此键自 GNOME 2.12 之后不再推荐使用。</longdesc>
</local_schema>
</entry>
<entry name="default">
<local_schema short_desc="默认窗口管理器(不推荐)">
<longdesc>用户窗口管理器无法找到时使用的默认窗口管理器。此键自 GNOME 2.12 之后不再推荐使用。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="terminal">
<entry name="exec_arg">
<local_schema short_desc="执行参数">
<longdesc>在“执行”键定义的终端里执行程序的参数。</longdesc>
</local_schema>
</entry>
<entry name="exec">
<local_schema short_desc="终端应用程序">
<longdesc>当启动需要终端的程序时使用的终端程序</longdesc>
</local_schema>
</entry>
</dir>
<dir name="help_viewer">
<entry name="accepts_urls">
<local_schema short_desc="浏览器理解远程命令">
<longdesc>默认的帮助查看器是否接受 URL</longdesc>
</local_schema>
</entry>
<entry name="needs_term">
<local_schema short_desc="帮助查看器需要终端">
<longdesc>默认的帮助查看器是否需要终端来运行</longdesc>
</local_schema>
</entry>
<entry name="exec">
<local_schema short_desc="默认帮助查看器">
<longdesc>默认帮助查看器</longdesc>
</local_schema>
</entry>
</dir>
<dir name="browser">
<entry name="nremote">
<local_schema short_desc="浏览器理解远程命令">
<longdesc>默认的浏览器是否理解 Netscape 远程控制命令</longdesc>
</local_schema>
</entry>
<entry name="needs_term">
<local_schema short_desc="浏览器需要终端">
<longdesc>默认的浏览器是否需要终端来运行</longdesc>
</local_schema>
</entry>
<entry name="exec">
<local_schema short_desc="默认浏览器">
<longdesc>全部 URL 的默认浏览器</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="accessibility">
<dir name="startup">
<entry name="exec_ats">
<local_schema short_desc="启动辅助技术程序">
<longdesc>登录 GNOME 桌面后启动的辅助技术程序</longdesc>
</local_schema>
</entry>
</dir>
<dir name="keyboard">
<entry name="stickykeys_modifier_beep">
<local_schema>
<longdesc>按下修饰键时响铃</longdesc>
</local_schema>
</entry>
<entry name="stickykeys_two_key_off">
<local_schema>
<longdesc>如果两个键同时按下则禁用。</longdesc>
</local_schema>
</entry>
<entry name="slowkeys_delay">
<local_schema short_desc="最小间隔毫秒数">
<longdesc>除非按住 @delay 毫秒不放，否则不接受按键输入</longdesc>
</local_schema>
</entry>
<entry name="mousekeys_init_delay">
<local_schema short_desc="初始延迟毫秒数">
<longdesc>在鼠标移动键起作用前等待多少毫秒</longdesc>
</local_schema>
</entry>
<entry name="mousekeys_accel_time">
<local_schema short_desc="经过多少毫秒后开始加速">
<longdesc>在多少毫秒内从 0 增长到最大速度</longdesc>
</local_schema>
</entry>
<entry name="mousekeys_max_speed">
<local_schema short_desc="每秒像素点">
<longdesc>最大速度是每秒钟移动多少个像素点</longdesc>
</local_schema>
</entry>
<entry name="bouncekeys_delay">
<local_schema short_desc="最小间隔毫秒数">
<longdesc>忽略在 @delay 毫秒内多次按下的同一个键</longdesc>
</local_schema>
</entry>
</dir>
</dir>
</dir>
</dir>
</dir>
</gconf>